Dyno Pro roadside dynamometer

Roadside dynamometer for Professionals

DynoPro is a road dynamometer for measuring power, torque, acceleration and other parameters of motor vehicles. Measurements can be made on vehicles with any type of drive. The dynamometer is designed for measurements in motorsport in the broad sense by professionals.

15.500,00 zł (12.601,63 zł net)

Description of Kit Components

Discover a complete all-in-one solution for versatile use, fast and hassle-free with guaranteed effectiveness. A mobile roadside dynamometer for professional use.

A - Protective case with foam insert
B - Tablet (with DynoPRO app) in a protective case, charger
C - Dyno probe - attached to the wheel of the vehicle
D - OBD2 probe
E - Set of attachment sockets Dyno probes - 17mm , 19mm, 21mm , 22mm
F - M12 threaded pin for mounting Dyno probes and M10 screw with spring washer
G - Allen wrench 8mm, 10mm and wrench 14mm

All components were made on CNC machine tools. Assembly elements
Are made of tempered quality steel.

dynoPRO - A Fast and Effective Solution

The device features a compact housing made of aluminum and plastic.

Assembly of the device takes about 2 minutes after which the equipment is ready for measurement.

The measurement requires the weight of the vehicle and the tire size (in format, for example, 205 55 16 or circumference in mm).

The device has a built-in weather station for measuring temperature and atmospheric pressure(-40° + 100°, 300-1100hpa). Besides, the device can read the ambient temperature from the OBD2 connector.

Connectivity with the DYNO and OBD2 probe is via Bluetooth. The Dyno probe has a built-in battery that allows for about 10 hours of operation. The OBD2 probe is powered from the OBD2 connector.

In addition to the standard measurement of power, the device allows logging additional engine parameters via the OBD2 connector, such as boost pressure , pressure on the injection rail, exhaust gas temperature, etc., and placing them on the chart in relation to the power or torque graph.

In addition to power measurement, the software allows engine controller diagnostics in the EOBD standard (identification of the engine controller and diagnostic protocol, reading and clearing DTC errors, measuring actual values).

Measurement results are presented in 3 variants. Actual, DIN70020, SAE J1349 and EEC. Repeatability error of measurements with the same procedure and conditions below 1%.

The device has no time or quantity limitations in operation. Free software updates. Technical support. The warranty for the device is 2 years.

Technical Specifications

Dyno probe

weight: 180g
wireless connectivity: Bluetooth
power supply: Li-Ion 3.7V 1000 mAh battery
material: aluminum, steel
weather station: temperature from -40°C to 105°C, pressure from 500hPa to 1100hPa

OBD2 probe

weight: 50g
wireless connectivity: Bluetooth
vehicle connectivity: CAN, LIN, Single Wire CAN
power supply: 12V DC from the vehicle
material: ABS plastic

Tablet

weight: 655g
9.6-inch screen, IPS, 1280 x 800 (HD)
Qualcomm MSM8917 quad-core A53 processor
Android™ N operating system
ROM: 16 GB, RAM: 2 GB
GPS, A-GPS, GLONASS, BDS
WIFI/WAPI connectivity 802.11 a/b/g/n@2.4GHz, 5GHz, Bluetooth
main camera: 5 Mpx, autofocus, front: 2 Mpx, autofocus
3.7 V 4,800 mAh battery
5V /1A charger

Suitcase

weight : 2.5kg
external dimensions: 40.6 x 33 x 17.4 cm (L x W x H)
material: polypropylene + ABS

Additional Information

Standardization of measurements
Supported protocols
Measurement repeatability error: < ±1%
Free software updates
Total weight of the set: 5 kg
Technical support
Warranty 24 months